Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

The development in electronics increases the demand for good design methods and Design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two testcases has been designed. The testcases are selected to represent the FPGA designs made at Ericsson Microwave Systems.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

This 15 point thesis is carried out at Saab Dynamics AB in Karlskoga. The company produces defense material aimed at the Swedish market and for export.The task was to make a survey of the current zeroing procedure for Sub Caliber Adapter for 84 mm recoilless rifle Carl Gustaf, and to examine the accuracy of the tools used today for zeroing.Measurements performed show that some of the tools has good accuracy for zeroing of Sub Caliber Adapter 20 mm withe other tools are not so good. The accuracy for zeroing of Sub Caliber Adapter 7.62 mm is not sufficientWith a suitable design it is possible to produce tools with good accuracy for zeroing of Sub Caliber Adapters..

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

This paper presents the results of a workplace study of two smaller companies in the design industry. The core issue has been to investigate the companies use of technical tools and to what extent social praxis influence the daily work. The methods used are based on a qualitative analysis of interviews and observations. Various kind of work procedures, such as verbal and computerized, have been identified, but the most important occurrence was how spontaneous conversations between employees required certain flexibility, since the actors repeatedly were required to change focus and quickly perceive different information. For that reason, a thesis has been defined regarding how the use of spontaneous communication put an indirect need of a flexible working environment and also how this lead to more significant participation and exchange of information, as well as more awareness at the companies..

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

The purpose of this study was to investigate how two students at intermediate level in reading and writing disabilities and two special education teachers perceive the use of assistive tools in school. The questions used to answer the purpose was how assistive tools are used based on students´ perceptions, the purposes for which assistive tools are used based on special education teachers´ perceptions, what opportunities and/or barriers pupils and special education teachers experiences with assistive tools and how it works when assistive tools are implemented based on students´ and special education teachers´ perceptions. Data were collected by interviews. The results show that the assistive tools are mainly used for writing assignments and to ?read-with-ears?, primarily to facilitate the learning process in the classroom.

Den här uppsatsen speglar ett examensarbete för Färggrossen i Nybro. Ett nytt måleriverktyg, närmare bestämt en lackpensel tas fram för yrkesmålare.Fokus för projektet har legat på användarstudier med hjälp av yrkesmålarna Thomas Molin och Mikael Brandén. Studierna har börjat med observationer utav arbetsprocess och hantering av verktyg, därefter uppföljande tester av skissmodeller.Två serier med skissmodeller tas fram för användarstudier och följs sedan upp med en förprototyp som detaljutvärderas. Resultatet blir ett verktyg med vinklat skaft som ska skapa en flexibel pensel för många olika grepp..

New technologies and new consumer behaviors are having a large impact on mediacompanies. The biggest change is in the behavior of the younger demographic whereold platforms like television are abandoned for new online platforms. In this newworld, media companies and organizations need new tools and business models tostay competitive. One such tool is Design Thinking, a term used to describe a cognitivedesign-specific set of activities used during a design process. It has been popularizedin commercial areas and there the term is used to describe an applicable workflowused to promote the skills required to use Design Thinking.

The overall purpose of this study is to examine how preschool teachers make use of digital tools in correlation with pedagogical documentation. More specifically, the purpose is to interview preschool teachers about their ideas and their use of the digital tool Förskoleappen to record and document childrens learningprocesses. The purpose will be answered with help from the following questions: In what way do preschool teachers use Förskoleappen in pedagogical documentation? What ideas and views do preschool teachers have about digital technology in general and Förskoleappen in particular? In order to find the answers to our questions we carried out a qualitative study in the form of interviews with six preschool teachers from two different preschools. We have used the designtheoretical perspective as our theoretical frame.

The use of laptops, interactive whiteboards and the Internet is step-by-step working it?s way into Swedish schools. The aim of this study is to investigate the attitudes of teachers towards using IT-related tools in their teaching. How are the tools given used as mediating tools, what new methods do the teachers find themselves discovering while using these, how do the teachers feel about digital teaching platforms and how do the IT-related tools affect students language progression? These are all questions that this study is meant to answer.